ts series 50 to 250 ma meets mil-r-28750/5,6, & 7 features hermetically sealed to-5 package transformer coupled high speed switching TS5-1Y switches ac or dc input characteristics input voltage range 4.0 ?7.0 vdc maximum turn-on voltage 5.0 vdc minimum turn-off voltage 1.0 vdc i/o dielectric 1000 vac pk-pk output characteristics max. output current (continuous, 25?) 50 maac or madc (TS5-1Y) 250 madc (ts6-1y) 100 madc (ts7-1y) max. output voltage 40 vac or vdc (TS5-1Y) 40 vdc (ts6-1y) 250 vdc (ts7-1y) max. on-resistance 5 ohms (TS5-1Y) turn-on time turn-off time 10 ?ec. 15 ?ec. environmental characteristics shock 1500 g s, 0.5 ms. vibration 100 g s, 10 to 2000 hz operating ambient temperature -55 to +125? dc solid state relays 1 control source dc supply 3 75 + + 1 control source ac or dc supply 3 75 load load 46 solid state relays tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation terminal view
47 solid state relays tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation dc solid state relays ew .335 dia max (8.51) -60 -40 -20 20 40 60 80 100 120 140 10 20 30 40 50 60 70 80 400 90 300 200 100 -60 -40 -20 20 40 60 80 100 120 140 10 20 30 40 50 60 70 80 400 90 300 200 100 -60 -40 -20 20 40 60 80 100 120 140 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 100 90 output current (ma) output current (ma) output current (ma) ?5 c ?25 c ?5 c ?25 c ?5 c ?25 c .370 dia max (9.40) .275 max (12.70) .50 min (12.70) .017 dia (0.43) .100 (2.54) .200 (5.08) .031 .032 (ref) (0.81) 45 0 6 vdc input 5 vdc input rated current 4 vdc input 7 vdc input 6 vdc input 5 vdc input rated current 7 vdc input 0 6 vdc input 5 vdc input rated current 4 vdc input 7 vdc input 0 4 vdc input ambient temperature ( c) ambient temperature ( c) ambient temperature ( c) ts5/ts6/ts7 output current vs. input control voltage and ambient temperature TS5-1Y ts6-1y ts7-1y notes: 1) reversing polarity of input (or output except for ts5-1) may cause per- manent damage. 2) input must be a step function. rise or fall time, as applicable, not to exceed 100 sec. 3) inductive loads must be diode suppressed. 4) for any control voltage, the maximum load current shown on graphs must not be exceeded. attempting to draw currents in excess of those specified on graphs can cause per- manent damage.
|
